Stanceparts air lift kits
Drive low, lift when you need it! The Stanceparts air lift kits can raise your car by 50mm with the press of a button.
This four-corner kit includes four cups. You need to have an existing 12-bar air pressure source on your vehicle in order to operate the cups.Why?
An air lift kit makes life with a low car so much easier. You get the ease of height, but maintain a low stance and spot-on fitment when you need it.
When passing speed bumps or gravel roads.When washing the car or driving to a garage.When changing tires to allow a jack to fit under the car for starters.Recommended max speed in top position 60km/hAny other situation where you wish you wouldn't have such a slammed ride ;)Kit contents
4 air cups12 meters airline3 t-splittersHow to order?
Please measure the front and rear shock shaft diameters, and include them in your order's notes on checkout.Fitment requirements for Stanceparts airlift system
The Stanceparts air cups will fit any brand coilovers, as long as they meet the requirements.
Make sure the dimensions match your coilover,
we strongly recommend to measure with a caliper.NOTE: Most cars have different spring and shock dimensions on the front and rear axles.Measurements
Springs
The outer diameter must be less than 99mm.The inner diameter must be 61 mm or more.Coilover shaft
Measure the thickest part of the coilover shaft.
Available for coilover shaft diameters: 12,5mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm and 40mm (with reduced load cap)Springs
Linear springs
The Stanceparts air cup lift system will only fit on linear springs, it will not fit on "shaped" springs as shown in the figure. If you have ''shaped'' springs, it's most times possible to install linear springs.
High spring rates
If you're using extreme high spring rates, higher than the original rates that came with your coilovers, then it's possible that you can't use the full 50mm lift from the air cups. Due to the extreme high spring rates, the weight of the car won't compress the springs and damper enough to create a stroke for the air cups to lift. This can be solved by using helper springs.Dimensions
The diameter of the air cup is 120 mm.The fitting is 17mm.
The air cup is only 20mm thick in the lowest position. Depending on your coilovers and vehicle, the air cups will take up a certain space. In most cases this is 20 to 30mm. If you have enough travel left on your coilovers to lower it, it won't be a problem. If not, you can install shorter springs to compensate this.How does it work?
The air cup is mounted on the top of the spring and just act like a spacer. When you put pressure on system, the air cup will expand and the car will raise with 50mm. The air cup lift system does not affect the ride quality and performance of your coilovers.
Max total car weight: 2000 kg / 4400 lbs (max axle weight: 1300 kg / 2850 lbs)Installation instructions
Instructions for installation are found here:
Stanceparts airlift kits installation manual (opens in a new window)Warranty
Air cups have a warranty of 2 years from purchase.Air compressors have a warranty of 1 year from purchase. (Covered by Viair)Improper use or installation errors void warranty.Contact
BC Motors Oy / Race.fi
Kisällintie 4, 04500 Kellokoski
Finland
☎ 020 790 2 790
✉ info@race.fi
☛ www.race.fi
Read here who we are and what we're about: about us.